atelier 13 audio
Accessories
RACKS | COMPONENT ISOLATION FOOTERS
FINITE ELEMENTE
Our PAGODE° range of hi-fi equipment supports, our CERA° range of component feet and our CARBOFIBRE° range of isolation platforms ensure the effective damping and dissipation of sound impairing resonances, in order to let your high-quality components, speakers and racks reach their full potential. The music is no longer restrained by any limitations, the music now sounds more transparent and detailed, full of emotion and dynamics.
CERA SERIES
We at Finite Elemente take care of the optimal set-up of your hi-fi components. We applied all our entire experience and knowledge to improve the sound of your hi-fi or home theater system.
Real sound quality “Made in Germany” from one of the leading manufacturers of innovative high-end audio products.
Cutting edge technology from one of the leading manufacturers
of high-end audio products.
The ultimate direct coupling technique for your audio components, composed by ultra-hardened ceramic balls in high-precision coupling devices.
Better resolution, better soundstage, better dynamics, and better music.
PAGODE SERIES
A new dimension in music reproduction thanks to the revolutionary Resonator Technology. The result: Precision in detail, transparency in the dynamics and an incomparable vivid musicality.
Real sound quality “Made in Germany” from one of the leading manufacturers of innovative high-end audio products.
DESIGN
Solid H-shaped strut structure in combination with high-absorption shelf with ceramic ball coupling. Damping and centering of the shelf by means of elastomer dampers.
Canadian maple and stainless steel in a perfect finish.
Controlled resonance damping by means of four resonators matched individually to each level.
FINISH
Canadian maple wood in seven standard color finishes.
Aluminum side pillars silver-grey matt anodized as standard or high-gloss polished at extra cost.
PAGODE EDITION MKII RACK
SYSTEM RACK
-
Clear edged design with a homelike look
-
Technically identical with the Pagode Master Reference
-
Each model carries a dedicated resonator set-up
-
Wood frame with front metal décor insert in anodized or high-polished aluminum
-
Aluminum side pillars with acoustically dampening wood covers
-
MAP $7,400 to $27,500
-
See link to PDF Price List below
-
PLATFORM
-
The platforms allow for power amplifiers or mains power supplies to be positioned lengthwise or crosswise.
-
Equipped with the Resonator Technology of the rack models.
-
Available in two sizes
-
MAP $2,000 to $3,000
-
See link to PDF Price List below
-
FRAME
Clear-edged frame design with flush shelves make the Pagode Edition MKII a modern variant of the renowned Master Reference.
COVERS
Wood covers on the aluminum side pillars improve the sound by dampening vibrations, but also provide an attractive compact look.
QUALITY
Perfect finish quality and dimensionally accurate workmanship persuade in every single detail.
PAGODE MASTER REFERENCE RACK
SYSTEM RACK
The Pagode Master Reference stands out with its well thought-out design based on solid wooden frames in Canadian maple, highly damped absorber shelves and the tried-and-tested Pagode sidespike technology.
A new dimension in music reproduction can however be truly experienced thanks to the revolutionary Resonator Technology, exclusively applied in the audio furniture sector by Finite Elemente and developed in co-operation with Prof. Dr. Borchert of the University of Applied Sciences in Dortmund, Germany. Precision in detail, transparency in the dynamics and an incomparable vivid musicality are the impressive results of this consistent research.
MAP $7,400 to $27,500
See link to PDF Price List below
PLATFORM
The platforms allow for power amplifiers or mains power supplies to be positioned lengthwise or crosswise.
Available in two sizes.
MAP $2,000 to $3,000
See link to PDF Price List below
CARBOFIBRE SERIES
The ultralight isolation bases made of carbon fiber-layered honeycomb cores provide a significantly improved sound quality through their controlled resonance damping and dissipation – more detail, more dynamics and ultimately more music.
Our isolation bases offer the optimum combination of lightweight design and extreme torsional rigidity.
DESIGN
CARBOFIBRE SD
Single-layer version in 23 mm thickness for light to middle-weight components (load capacity up to 50 kg).
CARBOFIBRE HD
Multi-layer version in 45 mm thickness for light to heavy
components (load capacity up to 100 kg).
CARBOFIBRE SD
CARBOFIBRE HD
CARBOFIBRE SD
Specifications
-
Material: Carbon fibres with ultra-light honeycomb core encased with carbon fibres on all sides, single-layer construction
-
Application: for light to medium-heavy components
-
Dimensions (WxDxH): CF01: 450 x 400 x 23 mm / CF02: 500 x 475 x 23 m
-
Useable height: 45 – 55 mm (incl. adjustable feet)
-
Load capacity: 50 kg
-
Special features: height-adjustable feet made of precision-manufactured stainless steel, precision bubble level for perfect levelling of the isolation base
-
Options: CERABASE°, CERAPUC° oder CERABALL° available as upgrad
-
Special dimensions available upon request
MAP $1,500
See link to PDF Price List below
CARBOFIBRE HD
Specifications
-
Material: Carbon fibres with ultra-light honeycomb core encased with carbon fibres on all sides, multi-layer construction
-
Application: for light to heavy components
Dimensions (WxDxH): CFHD01: 450 x 400 x 45 mm / CFHD02: 500 x 475 x 45 mm -
Useable height: 67 – 77 mm (incl. adjustable feet)
-
Load capacity: 100 kg
-
Special features: height-adjustable feet made of precision-manufactured stainless steel, precision bubble level for perfect levelling of the isolation base
-
Options: CERABASE°, CERAPUC° oder CERABALL° available as upgrade
-
Special dimensions available upon request
MAP $2,000
See link to PDF Price List below
